What should I pay attention to when using Heat Shrinkable Tube?

The basic process of Heat Shrinkable Tube production is rubber mixing processing, cord and canvas processing, Cable Sleeve molding, vulcanization, etc. The processing methods and forming equipment for the skeleton layer of Cable Sleeve with different structures and skeletons are different.

Features: The inner layer of the Cable Sleeve directly bears the wear and corrosion of the conveying medium to prevent leakage; the outer rubber layer of the steel skeleton suction tube protects the skeleton layer from external damage and erosion; the skeleton layer is the pressure layer of the Cable Sleeve, giving the pipe body strength and stiffness. The working pressure of the Heat Shrinkable Tube depends on the material and structure of the skeleton layer. According to the material and structure of its skeleton layer, it can be divided into full Cable Sleeve (no fabric material), cloth Cable Sleeve (skeleton layer is cloth layer, suction Cable Sleeve (there is a layer of metal spiral outside the cloth layer, braided) Cable Sleeve (skeleton layer is braided steel or fabric, winding Cable Sleeve, knitted Cable Sleeve (skeleton layer is knitted fabric, short fiber Cable Sleeve (short fiber and rubber blended and pressed), attractive Cable sleeving (with a layer of metal spiral outside the cloth layer), braided cable sleeving (skeleton layer is woven steel or fabric, winding cable sleeving, knitted cable sleeving (skeleton layer is knitted fabric), short fiber Heat Shrinkable Tube (made of short fibers and rubber).
1. Please ensure that the product conforms to the specifications and models of the equipment design.
2. Before use, please ensure that the product meets the specifications and models of the equipment design.
3. If the goods are worn or damaged by hard objects during transportation or loading and unloading, please pay attention to the storage of the originals and contact the company in time. If used, the company will not be responsible.
4. The use must be guided by professional operating technicians. It is not allowed to use ordinary Cable Sleeve instead of hardware pump tubes, and it is not allowed to connect the front end. When using hardware pump tubes, the curvature should not be too large, otherwise the Cable Sleeve will be overloaded under pressure and cause losses at their own expense.
5. It must be used according to the company's pressure data. When the internal glue is obviously worn, the flange at the outlet is obviously worn, the pressure is too high, the pipe is blocked, etc., and cannot be replaced. Indeed none of the above phenomena. If the pressure is normal, the same product can be replaced after the company sends staff to confirm.
6. After use, please do a good job of cleaning the pipeline to make the handover work go smoothly.
7. Keep it stable and dry, and prevent contact with acids, alkalis, oils and organic solvents that affect the quality of rubber.
In short, the main factor that determines the service life of the Heat Shrinkable Tube is the amount of compressed Heat Shrinkable Tube; the second factor is the way, strength and frictional heat of the compressed Heat Shrinkable Tube. To prolong the service life of Heat Shrinkable Tube, it is necessary to reduce the amount of compressed Heat Shrinkable Tube, reduce damage to the Heat Shrinkable Tube compression method, and accurate compressive strength. The Heat Shrinkable Tube pump roller only compresses the Heat Shrinkable Tube once at a time - this undoubtedly extends the life of the tubing.