What are the cleaning methods for Stainless Steel Braided Sleeve

Nowadays, the application of Stainless Steel braided sleeve is very extensive, but there will be rust in the process of using Stainless Steel Braided Sleeve, and the rusty straight seam welded steel pipe will affect its normal use, so it is found that stainless steel braided If there is rust on the casing, it needs to be cleaned in time. Today, I will tell you a few ways to clean the straight seam welded steel pipe. You can learn about it:

1. First of all, we can use solvent or emulsion to clean the appearance of Stainless Steel Braided Sleeve. This method is very effective for oil and grease or dust and other organic substances existing on the surface of Stainless Steel Braided Sleeve.
2. Secondly, if the surface of the Stainless Steel Braided Sleeve is rusted, we can use a wire brush to polish the appearance of the Stainless Steel Braided Sleeve, so as to achieve the purpose of rust removal.
3. The spraying method can also be used. Using this method can not only completely remove rust, oxides and dirt, but also the stainless steel braided sleeve can reach the required level under the impact of abrasive abrasives and the effect of friction. average roughness.
4. Automobile industry
Cable Sleeve are mainly used in exhaust systems, accounting for more than 1/2 of the total amount of Cable Sleeve used in automobiles, and B80% are ferrite Cable Sleeve. The exhaust gas produced by the car engine passes through the exhaust gas intake pipe, front pipe, hose, converter, center pipe and finally flows out of the muffler. Exhaust system commonly used steel grades are 409L, 436L and so on. Automobile mufflers mainly use stainless steel braided sleeves. According to estimates, the Stainless Steel Braided Sleeve used in automobiles accounts for about 1.5% of the entire downstream consumption of Stainless Steel Braided Sleeves, while the ratio of Cable Sleeve, seamless pipes and welded pipes is about 2: B1.
5. The petrochemical industry includes the fertilizer industry
There is a great demand for Stainless Steel Braided Sleeve. The industry mainly uses Cable Sleeve seamless pipes. The specifications include: B304.B321.B316.B316L.B347.B317L, etc. A B50mm or so, the specific application areas are: furnace tubes, material delivery tubes, heat exchanger tubes, etc.
Stainless Steel Braided Sleeve and its water delivery equipment are very good basic water purification materials with strong anti-corrosion performance, which cannot be compared with cast iron pipes, carbon steel pipes, plastic pipes, etc. Water preparation, storage, transportation, purification, regeneration, seawater desalination and other water industry materials selection. The annual demand is about 25,000 tons.
6. Equipment manufacturing and maintenance
The annual consumption of Stainless Steel Braided Sleeve is more than 0,000 tons. This type of industry mainly uses sanitary or antibacterial grade stainless steel braided sleeves. The hygienic seamless pipe made of imported SUS304.B316L can meet the special requirements of various media in the field of food and biopharmaceuticals. Antibacterial braided net pipe has the advantages of braided net pipe and good antibacterial performance. The demand for kitchen equipment, workbenches and utensils in the food industry, medical equipment, tableware and towel hanging racks in daily life, and brackets for refrigerators continues to increase.