What is the production principle of the water-permeable and ventilated Kevlar Braided Sleeve?

The so-called Kevlar Braided Sleeve refers to a product in which only different systems work in one component and do not interfere with each other. For example, a single-hole Kevlar Braided Sleeve (4*6) is regarded as an independent water pipe. The working system, now it is necessary to introduce the gas into the terminal. Does it also need a pipe (because water and gas cannot be introduced together) It is also regarded as a separate working system, which consists of two separate Kevlar Braided Sleeve, and Kevlar Braided Sleeve manufacturers will adopt integrated extrusion molding in order to avoid repeated production. Two separate Kevlar Braided Sleeve are extruded in one mold to form an Kevlar Braided Sleeve. Of course, this is an example and can also be produced by three One or more than three separate Kevlar Braided Sleeve can also be called Kevlar Braided Sleeve through extrusion molding.

The above describes the production design principle of Kevlar Braided Sleeve. Now let`s talk about the production principle of special-shaped Kevlar Braided Sleeve. The Kevlar Braided Sleeve circulating in the market at this stage are generally divided into regular and irregular. Regular Kevlar Braided Sleeve The size and wall thickness requirements of each Kevlar Braided Sleeve are the same. For example, a single Kevlar Braided Sleeve is 4*8 specifications, and the remaining several Kevlar Braided Sleeve are of this specification, and this has rules The Kevlar Braided Sleeve are generally formed in the shape of "8" or multiple "8" shapes side by side, and all the inner and outer diameters are the same. Generally, there are more in the field of drainage. It is relatively easy to produce, because its size is consistent and it is convenient for manufacturers to debug equipment and facilitate mass production.
The principle of irregular Kevlar Braided Sleeve is that each individual Kevlar Braided Sleeve has no connection with each other, and the customer has precise and strict requirements for the gas or liquid diverted by each pipe, that is, the flow needs to be controlled, so the size of each pipe is uniform. There are differences. Some single Kevlar Braided Sleeve are relatively large in size, and some are relatively small. Each Kevlar Braided Sleeve is different but needs to not interfere with each other. A hole in the Kevlar Braided Sleeve drains water and B hole in the Kevlar Braided Sleeve drains liquid medicine. If the liquid drainage flow is 1.5 times that of water, and at this time, the Kevlar Braided Sleeve with hole A needs to be reduced by 1.5 times in the same proportion as the Kevlar Braided Sleeve with hole B, which can meet this customer requirement. The reason for having an irregular Kevlar Braided Sleeve The reason is because each individual Kevlar Braided Sleeve has special requirements, and most of them are flow control. Of course, there are exceptions. The reason why individual customers use irregular Kevlar Braided Sleeve is because the other hole is not used to guide products, but to cover some wiring harnesses such as wires, etc. These designs do not have special requirements. It is also relatively convenient. Generally, it is enough to make it a little larger than the wire harness, which also leads to the inconsistency of the two Kevlar Braided Sleeve on the left and right, which forms non-standard Kevlar Braided Sleeve.