What technical points need to be mastered to install PP Self Wrap Braided Sleeve?

PP Self Wrap Braided Sleeve play an important role in waterproofing, sealing and energy saving in plastic steel doors and windows, broken bridge aluminum doors and windows and wooden doors and windows, sound insulation, dustproof, freezeproof and warm. It must have strong tensile strength, good elasticity, and good temperature resistance and aging resistance. In order to ensure the fastening of the rubber strip and the profile, the cross-sectional structure size of the rubber strip must match the profile of the plastic steel door and window. PP Self wrap braided sleeve are generally used for casement doors and windows, hanging windows, and folding doors and windows. The main functions are dustproof, insectproof, waterproof, sound insulation, sealing and so on. So what technical points do you need to master to install Pp Self Wrap Braided Sleeve?

1. When the factory produces doors and windows, PP Self Wrap Braided Sleeve can be directly installed on the doors and windows, but when transporting the doors and windows, care must be taken to prevent warping and deformation.
2. The selection of varieties and specifications of PP Self Wrap Braided Sleeve should match the type of doors and windows, width of cracks, and location of use, otherwise the expected effect will not be achieved.
3. The Cable Sleeve should be attached to the pressing surface of the joint of doors and windows, and not to the shearing surface, otherwise the service life of the Cable Sleeve will be greatly shortened.
4. Before pasting the PP Self Wrap Braided Sleeve, the joints of doors and windows should be cleaned in advance, and there should be no dust and dirt to keep it clean and dry.
5. The fixed position of the Cable Sleeve should ensure that even if the seams are completely sealed, the doors and windows should not be closed too tightly or too loosely.
6. After the joints of door and window frames are glued, the seals often need to be dried for a few minutes until the solvent in the glue evaporates, and then stick firmly.
7. When installing the PP Self Wrap Braided Sleeve, press it twice by hand to make the bond firm.