What are the cleaning requirements for the dust-free workshop of the Neoprene Velcro Cable Sleeve factory?

General factories can basically produce and make Neoprene Velcro Cable Sleeve products as long as they meet the requirements of environmental protection, but for some high-precision products, they must be processed and manufactured in a dust-free workshop. For example, Neoprene Velcro Cable Sleeve, latex tubes, which are often used in medical treatment, because these need to be in direct contact with the human body. If they are not produced in a clean room, some bacteria will remain on the product and cause harm to the human body. So as a clean room, what cleaning requirements does it have?

1. When cleaning the walls in the clean room, clean room dust-free cloth should be used;
2. Prepare cleaning agent with 90% deionized water and 10% isopropanol;
3. Use approved special detergent for clean room;
4. Check the garbage bins in the workshop and maintenance room every day and clear them away in time.
5. Vacuum every floor. Every time a shift is changed, the work completion should be marked on the map, such as where it ends and where it starts.
6. A special mop should be used to clean the floor of the clean room.
7. A special vacuum cleaner with a high-efficiency filter should be used for vacuuming in the clean room.
8. All doors need to be inspected and wiped dry
9. Wipe the floor after sucking the floor. Wipe the walls once a week.
10. Vacuum and wipe under the raised floor.
11. Wipe the pillars and support columns under the raised floor once every three months.
12. When working, you must remember to always wipe from top to bottom, from the place farthest from the door to the direction of the door.
The above are some cleaning requirements for the Cable Sleeve clean room. Compared with other clean rooms, the basic requirements are roughly the same.