What are the main ways to use Nylon Braided Sleeve?

Nylon Braided Sleeve are one of the most common products nowadays. Although this product is commonly used by people, few people pay attention to the application of Nylon Braided Sleeve. Therefore, the Nylon Braided Sleeve manufacturer will tell you about the common problems of Nylon Braided Sleeve, so that you can have more knowledge about Nylon Braided Sleeve.

Nylon Braided Sleeve, also known as hollow belts and wire protection sleeves, are made of polyester multifilament or polyester textiles. They have the characteristics of degreasing and anti-fouling, anti-corrosion and noise reduction, anti-corrosion and explosion-proof lighting. They can be widely used in industrial equipment, agricultural machinery and equipment, urban rail and other industries, and have a protective effect.

Because it is a closed-end acne sleeve, we must accurately understand the product diameter before purchasing, and then the Nylon Braided Sleeve specifications should be selected slightly larger, which is convenient for stringing and threading. Under normal circumstances, if it is used to wrap a pipe or cable, it is recommended that the Nylon Braided Sleeve specifications be selected about 2mm larger. If it is used to wear multiple pipes or electronic wiring harnesses, you can choose a sleeve of about 5mm larger.

In addition, because the Nylon Braided Sleeve needs a seaming process to close to prevent it from falling apart, it is recommended to pull the port horizontally when checking the goods to see if it is cracked. Of course, this problem is unlikely to occur under normal circumstances, just in case.

Nylon Braided Sleeve is a moisture-proof sleeve with a simple structure. It is often used to protect through-wall pipes in construction. The structure of Nylon Braided Sleeve is relatively simple. It is mainly composed of steel pipe and wing ring. The relatively long flexible waterproof casing is usually composed of 2-3 wing rings. Can steel pipe replace Nylon Braided Sleeve at the same time?

In some areas where regulations are relatively relaxed, steel pipe can be used to replace Nylon Braided Sleeve, because compared with steel pipe, Nylon Braided Sleeve has an additional wing ring. In this case, what is the role of adding an aircraft wing ring? It is easier to use steel pipe directly. In fact, this is not the case.

The pipe passes through the moisture-proof casing and directly contacts the moisture-proof casing. When the pipe is running normally, the water flowing through the pipe will have a flow velocity, which will also generate mechanical energy. Therefore, the normally running pipe will not move at all, but will shake continuously. During the continuous shaking of the pipe, the steel pipe will also be subjected to internal stress.

In the long run, the steel pipe may shake, causing the steel pipe to lose its function of protecting the pipe. However, if the wing ring is added, it will be different. The wing ring is a circle welded on the steel pipe. The primary function of the wing ring is to prevent the moisture-proof casing from bearing vibration, which is more prominent for the fixed moisture-proof casing.

This is also the main difference between Nylon Braided Sleeve and steel pipes. Therefore, Nylon Braided Sleeve and rigid water-proof casings are essentially different. Although Nylon Braided Sleeve only have one more wing ring than steel pipes, it is precisely because of this type of wing ring that Nylon Braided Sleeve are more widely used and more effective.