What causes the whitening of Stainless Steel Braided Sleeve?

There is a thorny problem in the Cable Sleeve industry, that is, after a period of use, white and foggy substances suddenly appear on the surface of the Stainless Steel braided sleeve. This phenomenon seems serious, but the original color can be maintained after wiping off. It will appear in some products with large structure and long vulcanization time. In the industry, this phenomenon is called frosting and fogging. Does this phenomenon exist in the Stainless Steel Braided Sleeve you bought.

There are many whitening phenomena in the Stainless Steel Braided Sleeve, which is only caused by the process error of the Stainless Steel Braided Sleeve manufacturer or the problem of the compatibility formula in the raw material. The main reason for white paint in the raw material is the conflict between silicone oil and other compounds in the secondary mixing process, such as adding proper internal release to the raw material to prolong the vulcanization time, etc. This phenomenon is very common with release agents, which can improve release rates and production efficiency, while useless dosages can cause products to turn white.
In addition to errors in raw materials and process methods, detailed handling during operation will also bring whitening to the product, too much release agent spray on the production line may cause frosting and vomiting, and it will also cause this when the temperature control is uneven a phenomenon. In addition, the aging of Stainless Steel Braided Sleeve also has certain factors, because the performance of raw materials is not outstanding. When using the influence of environment and temperature difference environment, the frequency of whitening is higher.
In view of the above phenomenon, manufacturers of Stainless Steel Braided Sleeve should first understand the parameters of raw materials before processing, and understand which substances can be added and which substances cannot be added to them. The final processing conditions of the machine need to be clarified in all aspects, and the main problem It is to control the addition of substances in raw materials, such as curing agent, color glue, silicone oil, etc., we must find out whether it can be added and tested after blending.