Shenzhen Huiyunhai Tech.Co., Ltd.
The difference between the raw materials of the Automotive Wiring Harness Protection Sleeve
The Automotive Wiring Harness Protection Sleeve has the characteristics of high strength, high elasticity, anti-aging, corrosion resistance, long-term use without deformation, and no cracks; the Automotive Wiring Harness Protection Sleeve is widely used in fitness, medical, toys and other industries. But as long as the products are produced, there will be good and bad points. The quality of the Automotive Wiring Harness Protection Sleeve products mainly depends on the raw materials of the Automotive Wiring Harness Protection Sleeve. There are three main sources of raw materials for autom
How does the stain on the surface of the Automotive Wiring Harness Protection Sleeve occur?
In the Automotive Wiring Harness Protection Sleeve industry, many Automotive Wiring Harness Protection Sleeve manufacturers will encounter some undesirable phenomena such as stains and color spots on the surface of some finished products when the Automotive Wiring Harness Protection Sleeve is formed. The color point refers to various abnormal color spots on the surface of the Automotive Wiring Harness Protection Sleeve after molding. The smudges and spots in the molding of the car wire harness protective cover belong to the poor appearance. How do the stains and spots on the Automotive W
It is well known that the elasticity of the Automotive Wiring Harness Protection Sleeve is good, but how to skillfully use the elasticity of the Automotive Wiring Harness Protection Sleeve and prolong the life of the Automotive Wiring Harness Protection Sleeve may be too clear to everyone. Today, I will introduce how to use it correctly. Protective cover for car wiring harness and prolong its life.
What kind of glue is the best for bonding the Automotive Wiring Harness Protection Sleeve
Due to its unique characteristics, Cable Sleeve are used to make a variety of daily life and industrial and agricultural products in daily life, but many of them need to be bonded with glue. So can all glues be used to bond Cable Sleeve products? The answer is definitely: no. The following editor will slowly explain what kind of glue can be used for the Automotive Wiring Harness Protection Sleeve, what kind of glue is better, and it is more environmentally friendly.
The hardness of the Automotive Wiring Harness Protection Sleeve is different due to its different use requirements. Some customers asked: For the same formula of Automotive Wiring Harness Protection Sleeve, the hardness of the rubber compound made with Cable Sleeve is about 10° lower than that made with internal mixer. Is this caused by the rubber mixing method?
Manufacturers of Automotive Wiring Harness Protection Sleeve have all encountered that the hardness of the Automotive Wiring Harness Protection Sleeve may be increased due to a small mistake during production, which affects the quality of the product, causes waste of materials, and increases the cost of production? So how can we reduce its hardness and reach the product's target? According to the analysis of Automotive Wiring Harness Protection Sleeve manufacturers, the hardness of the finished Automotive Wiring Harness Protection Sleeve cannot be changed, but for the vulcanized Cable Sl
The function and correct use of the Automotive Wiring Harness Protection Sleeve
Automotive Wiring Harness Protection Sleeve are widely used in electronic products. The function of Automotive Wiring Harness Protection Sleeve is mainly to transfer heat through gaps, and play the role of insulation, shock absorption and sealing. However, due to improper use by some customers, it is not only useless to achieve the desired effect, but also damages the Automotive Wiring Harness Protection Sleeve. What should be paid attention to when using the Automotive Wiring Harness Protection Sleeve?
Will the Automotive Wiring Harness Protection Sleeve produce toxic substances at high temperature
In daily life, people are questioning whether the Automotive Wiring Harness Protection Sleeve will produce toxic substances at high temperature, and whether food and food materials will produce toxic substances in direct contact with the Automotive Wiring Harness Protection Sleeve. Such doubts have always existed in the minds of consumers. So that people dare not buy various Cable Sleeve daily necessities. As a result, the Automotive Wiring Harness Protection Sleeve is not recognized by consumers in China, and the market prospect cannot be opened. So let's talk about whether the Automoti
Manufacturers of Automotive Wiring Harness Protection Sleeve will use accelerators and vulcanizing machines when producing Automotive Wiring Harness Protection Sleeve. But sometimes in the production process, there will be semi-automatic sulfur in the Cable Sleeve, how should we deal with it? 1. First of all, if the vulcanizing agent and accelerator have not been added, you can run the interna
After the production of the Automotive Wiring Harness Protection Sleeve is completed, it is packaged and mailed to the customer immediately. However, some customers have reported that: the contact surfaces of the Automotive Wiring Harness Protection Sleeve are prone to mutual adhesion, and it will be laborious to tear it apart. There will be an obvious trace on the edge, what is the reason for this, and will it affect the use?
What are the reasons for the explosion of the Automotive Wiring Harness Protection Sleeve?
People in the industry know that Automotive Wiring Harness Protection Sleeve often encounter various problems during the production process. For some relatively soft products made of low-hardness materials, they are prone to tearing, which is called edge bursting in the industry. This phenomenon is a difficult problem for many Automotive Wiring Harness Protection Sleeve manufacturers. Some manufacturers have adjusted the time, temperature, pressure, etc. of the product during production, but this phenomenon also occurs. What is the reason?
What causes the surface of the Automotive Wiring Harness Protection Sleeve to be rough?
After a period of use, the Automotive Wiring Harness Protection Sleeve will become less smooth and sticky, especially on kitchen utensils or Cable Sleeve phone cases. What is the reason for the rough surface of the Automotive Wiring Harness Protection Sleeve? The rough surface of the Automotive Wiring Harness Protection Sleeve may be caused by raw material problems, or it may be caused by improper maintenance. Is it possible that the surface is not smooth enough caused by the improper production of the Automotive Wiring Harness Protection Sleeve manufacturer? The answer must be "yes".
In the process of Automotive Wiring Harness Protection Sleeve processing, silk screen printing is an important process, because it can realize characters engraved in the Automotive Wiring Harness Protection Sleeve. This function is very important for Cable Sleeve keys and other special products. A good silk screen printing level can improve the quality of characters. However, in the process of silk screen printing of the Automotive Wiring Harness Protection Sleeve, sometimes the characters printed on the silk screen will fall off. What causes the characters to fall off after the silk scr
There are always some situations in the production and molding of Automotive Wiring Harness Protection Sleeve. For example, sometimes the size of the Automotive Wiring Harness Protection Sleeve is larger or smaller than the size on the design drawing. What is the reason? It should be known that if the size of the Automotive Wiring Harness Protection Sleeve after molding is different from the size of the design and production, the produced products can only be treated as defective products and scrapped. Therefore, manufacturers of Automotive Wiring Harness Protection Sleeve will pay more
Automotive Wiring Harness Protection Sleeve are generally used for industrial purposes such as water supply and oil supply, but due to various reasons. Some customers have reported that the outer rubber layer of the Automotive Wiring Harness Protection Sleeve will be damaged to varying degrees. The following editor will introduce in detail the reasons for the loss of the outer rubber layer of the Automotive Wiring Harness Protection Sleeve and how to deal with it.
A comprehensive explanation of the hardness of the Automotive Wiring Harness Protection Sleeve?
No matter what item has hardness, the calculation of hardness of different items is different. For example, the protective cover of Automotive Wiring Harness Protection Sleeve is a special case, and its calculation method is Shore hardness. Shore hardness: refers to the reading of the value measured by the Shore hardness meter. Its unit is "degree". Its description method is di
Why does the Automotive Wiring Harness Protection Sleeve emit an unpleasant smell after being used for a period of time? Will the irritating smell be toxic? Isn`t the Automotive Wiring Harness Protection Sleeve an environmentally friendly raw material? Why do things made of environmentally friendly raw materials still have a pungent smell? The following editor will take everyone to discuss the reasons:
Is it better to stick the Automotive Wiring Harness Protection Sleeve cold or hot?
How is the Automotive Wiring Harness Protection Sleeve bonded into a circle? Some of the silicone rings sold on the market look ugly and have poor stretching strength, while some are very beautiful and will not deform after long-term use, no matter how much they are torn. Cracked, why is the same Automotive Wiring Harness Protection Sleeve but the difference is so big. In fact, this is mainly related to the
The general steps in the production of Automotive Wiring Harness Protection Sleeve are natural rubber treatment--formulation according to the needs of use-mixing on the rubber mixer-parking (about 24 hours)-remelting-making semi-finished products-vulcanization-trimming- -test. But this problem will be encountered when mixing rubber, and the cable casing is structured. The following is an analysis of the reasons for the structuralization of the Automotive Wiring Harness Protection Sleeve and its control methods.
What precautions should be taken in the use of Automotive Wiring Harness Protection Sleeve?
First of all, the Automotive Wiring Harness Protection Sleeve has a good bending function in use, the bending radius is small, and it will not be pleated when it is bent. Therefore, in order to prevent the temperature from being too high, do not overload for a long time, pay attention to the heat sink of the radiator not to be polluted by oil, so as to prevent dust from adhering to affect the cooling effect; maintain a sufficient amount of oil to facilitate the circulation of oil to dissipate heat. Pressure test, the national standard requires that the test pressure is twice the working
The Automotive Wiring Harness Protection Sleeve is made of 100% gas-phase Cable Sleeve raw material. It is vulcanized by a high-temperature oven after adding a foaming agent through a unique process formula. A large amount of air is generated during the vulcanization process, resulting in a large number of small holes inside the Cable Sleeve. production. The biggest feature of the product is high and low temperature resistance and good elasticity. The high-quality Automotive Wiring Harness Protection Sleeve can be used intermittently at the extreme temperature of -60~300°C without quali
How are the bubbles in the Automotive Wiring Harness Protection Sleeve produced?
Everyone knows that there is another very important part that cannot be ignored in the case of ensuring other performances of the Automotive Wiring Harness Protection Sleeve, that is, the Automotive Wiring Harness Protection Sleeve must not have air bubbles. The tube is highly wear-resistant, so it can't stand a few tosses. Automotive wire harness protective sleeves are mainly extruded with platinu
If you don't pay attention to the Automotive Wiring Harness Protection Sleeve in the molding process, some bad phenomena will appear. For example, Cable Sleeve products have poor elasticity. However, some frequently used cable bushings have certain requirements for tensile toughness, and the product mainly needs its tensile toughness to maintain. Therefore, in some manufacturing industries, once the Cable Sleeve material used in the machinery industry has insufficient tension, the rebound and shock absorption will fail, and other performances of the product will be useless. Therefore, th
What should be paid attention to when producing Automotive Wiring Harness Protection Sleeve?
The Automotive Wiring Harness Protection Sleeve is a flexible tube made of silica gel with different properties according to the power and conveying material of the Cable Sleeve. The Automotive Wiring Harness Protection Sleeve is required to meet the standard of medical-grade Automotive Wiring Harness Protection Sleeve, and the tube is required to be odorless to meet food and drug standards, without obvious bubbles, impurities, and black spots, otherwise the Cable Sleeve will rub against bubbles or black spots during work. If the cover is worn out, what should be paid attention to when p
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.